Membrane Bioreactor Fiber Membrane Mbr System Mbr Wastewater Treatment Plant15m2Mbr

(0 reviews)

(686) Views

(0) Contacts

Membrane bio reactors frequently use hollow fiber membranes, which work well for treating mbr effluent. In MBR TANK, they are utilized in MBR STP with MBR SYSTEM. Membrane filtration plays a significant part in the treatment of water and wastewater, offering a more effective and cost-effective solution than traditional water technologies.

Contact Company

X Membrane

Jiangsu, China

(1358) Views

(3) Contacts

Biological processes such as suspended growth bioreactors are integrated with membrane bioreactors (MBRs) to treat wastewater (WWT) through the use of microfiltration (MF) or ultrafiltration (UF).A bioreactor with membranes is basically a substitute for the settlement tank used in the traditional activated sludge (CAS) system for the separation of solids from liquids. Better process control and significantly higher product water quality are provided to the end user by the MBR.
When compared to the traditional activated sludge process, the MBR process operates over a significantly different range of parameters.
SRT 5–20 days for MBR, 20–30 days for traditional system
F/M 0.05-1.5 d-1 for MBR systems, < 0.1 d-1 for conventional systems
Three different membrane topologies are typically found in MBRs .
1. Fiber hollow (HF)
2. Multitube
3. Flat sheet (FS).

Model	JX-MBR-10	JX-MBR-15	JX-MBR-20
Membrane Surface Area	10 S.Q.M	15 S.Q.M	20 S.Q.M
Membrane Material	R-PVDF and PET	R-PVDF and PET	R-PVDF and PET
Pore Size	0.1-0.04um	0.1-0.04um	0.1-0.04um
Fiber Diameter	OD:1.9-2.2mm ID:0.8-1.0mm	OD:1.9-2.2mm ID:0.8-1.0mm	OD:1.9-2.2mm ID:0.8-1.0mm
Flow Path	Out-in	Out-in	Out-in

                                                            Membrane material
                                                            R-PVDF
                                                        
                                                            Effective membrane area(m2)
                                                            10m2                   15m2    20m2
                                                        
                                                            Aeration rate
                                                            Gas water ratio 15:1-20:1
                                                        
                                                            Design Flux m3/0.1 Mpa 25℃
                                                            10-40l/m2/H
                                                        
                                                            PH range
                                                            1-12
                                                        
                                                            Operating temperature range
                                                            5-45℃
                                                        
                                                            Filter Type
                                                            Immersion suction filtration
                                                        
                                                            Component Connection Mode
                                                            Plug in
                                                        
                                                            Design flux
                                                            10-40L/m2·h
                                                        
                                                            Connecting pipe
                                                            32
                                                        
                                                            Initial water yield
                                                            >300L/m2·h
                                                        
                                                            Packaging material of membrane module
                                                            Plastic and Wooden Case
                                                        
                                                            Porosity
                                                            >70%
                                                        
                                                            Service temperature
                                                            5-45℃
                                                        
                                                            Operating pressure
                                                            <=0.3MPa
                                                        
                                                            Membrane pore size
                                                            0.1um/0.04um
                                                        
                                                            PH range
                                                            1-14
                                                        
                                                            Molecular weight cut off (Dal)
                                                            67000-100000
                                                        
                                                            Membrane material
                                                            Hydrophilicity PVDF (PET lining)
                                                        
                                                            Length
                                                            630mm
                                                        
                                                            Width
                                                            32mm
                                                        
                                                            Height
                                                            1000mm(10m2)  1500mm(15m2)  1960mm(20m2)
                                                        
                                                            Weight
                                                            4-5kg per piece(10m2)  6-7kg per piece(15m2)  8-10kg per piece(20m2)

MBR Utilization
When is MBR your top option?
1. You have limited space or wish to make good use of it.
2. High-quality treated water is required by the end user (e.g. for water reuse)
With more than 70 MBR membrane module products on the market today, the number of technology suppliers is still increasing even though a small number of large corporations dominate the MBR global industry.