PH Tester

(0 reviews)

(210) Views

(0) Contacts

PH calibration *Insert the electrode into the standard buffer solution of the pH value of 6.86 (25 C) mixed phosphate and stir gently, and the value is stable.

Contact Company

Hangzhou Lohand Biological Technology Co.,Ltd

Zhejiang, China

(1011) Views

(16) Contacts

Operation:
1. Take off the protective cover.
2. And clean the electrode (electrode cover around the white crystalline salt, which is a normal phenomenon, as long as the pH electrode can be dissolved in water. The electrode is located and disappeared)
3. Switch the battery compartment, pH will be inserted into the measured liquid, until the liquid dips slightly bottom line. The immersion conditions allow, can make solution to the location of the line is slightly higher than that of immersion
4. Stir gently until the display is stable and the display value is read.
5. After use, clean the electrode with clean water to reduce the pollution.
6. A few drops of saturated KCL solution can be dripped into the protective sleeve to maintain the electrode
7. Turn off the switch and put the protective sleeve on it.

                                                            Resolution
                                                            0.1 pH
                                                        
                                                            Accuracy
                                                            ±0.1 pH (at20°C)  ±0.2 pH
                                                        
                                                            Calibration
                                                            manual, 1 point
                                                        
                                                            Environment
                                                            RH 95% max; 0 to 50°C (32 to 122°F)
                                                        
                                                            Life
                                                            approx. 150 hours of use
                                                        
                                                            Dimensions
                                                            52x30x21 mm (5.9x1.2x0.8")

Used to measure seawater and control the salinity of water from fisheries and fish farms, natural sea water for aquariums, artificial seawater, and saltwater used for fish storage.
An effective tool at Aquaculture Cooperative Associations or in Aquaculture Research institutes.