FLR Series Anti-fouling Reverse Osmosis Membrane

(0 reviews)

(376) Views

(0) Contacts

Adopt the widest inlet water channel in the industry, to reduce the possibility of the membrane being fouled, which has an obvious cleaning effect.

Contact Company

Rightleder Environmental

Shanghai, China

(1416) Views

(0) Contacts

Anti-fouling Reverse Osmosis Membrane
FLR-S Series (Fouling Low & Resistance) is an Anti-fouling Membrane utilizing new membrane technology. The charge on the surface
of the membrane is neutral and is hardly affected by the adsorption of the charged substances. It uses the widest inlet water channel
in the industry, reduces the possibility of the membrane being fouled, and has an obvious cleaning effect.

Storage Conditions of Anti-fouling Reverse Osmosis Membrane

Before the first use, all membrane elements must be stored under the original packaging conditions.
The membrane is best placed in the original packaging and opened before the use of the water treatment system.
The transport temperature below 0°C may cause irreversible membrane damage and the transport temperature above 30°C may cause membrane degradation and deterioration of the protection solution.
Store in a cool, dry condition and a place that is not directly exposed to sunlight or artificial lighting. Storage temperature stays at 0°C to 30°C, and the longest storage time is 6 months.

General Information of Anti-fouling Reverse Osmosis Membrane

Once wetted, the membrane element must always be wet.
The limited warranty we promised will expire due to the fact that the user does not strictly follow the operational restrictions and guidelines set forth in this Code.
If the system is in a shut-down state for a long time, the membrane element is advised to be placed in the protective solution to prevent the growth of microorganisms.
It is the user's responsibility if uses an incompatible chemical and lubricant, and causes undue influence on the original.
The maximum allowable pressure drop of the single-pressure vessel is 60 psi (4.1 bar).
At no time can the backpressure be produced on the side of producing water to avoid the occurrence of harmful problems.

Its main features are: