AquaEnergy Expo is a global exhibition in the water and energy field which includes a magazine, a Knowledge hub, and a virtual expo.

Menu
Good Quality Tube Diffuser
(0 reviews)
0.01 USD
(449) Views
(0) Contacts

1 - 99 sets
$10.00
100 - 999 sets
$9.80
>= 1000 sets
$9.00

Contact Company

Hangzhou Juntai Plastic Products Co., Ltd
Hangzhou, China
(2274) Views
(84) Contacts

Good quality Tube diffuser is a highly developed diffuser with even better performance and properties than previous flexible membrane diffusers – high oxygenation capacity, minimal maintenance, and long life. The Good quality Tube diffuser can be used in a wide range of applications where large quantities of air need to be added, in order to maintain a high level of oxygenation. This gives great flexibility when designing an aeration system, enabling regulation of the amount of air added and the oxygen level, which can be optimized for maximum performance. The membrane diffuser doesn’t get blocked and is self-cleaning. No cleaning is needed under normal operating conditions. The tendency to become blocked due to contaminated low-pressure air leads to a rise in pressure, which expands the membrane and air channels, allowing the particles to pass through. This means that maintenance can be limited to switching the air supply off and on once a week, to facilitate the self-cleaning of the membrane. The flexible membrane has a backwash valve function, providing double security against blockage from the outside. The air channels close when the air pressure falls. The water pressure seals the membrane against the bottom plate including the unperforated center of the membrane against the inlet of the bottom plate.
Juntai Smart Tube Diffuser Parameter
Item number
TD63
TD93
TD113
Bubble type
Fine Bubble
Fine Bubble
Fine Bubble
Tube diameter(mm)
63
93
112
Material
Special Formula EPDM with UV Protector import from Germany
Tube material: Acrylonitrile-butadiene-styrene with UV Protector (ABS)
Length
500/750/1000mm
500/750/1000mm
500/750/1000mm
Connector
3/4NPT
3/4NPT
3/4NPT
Flow range(m³/h)
2-14
5-20
6-28
Bubble Size(mm)
1-2
1-2
1-2
Service Area(m²)
0.75-2.5
1.0-3.0
1.5-2.5

Model TD113
Moc Special formula EPDM
Tube reinforced ABS(Acrylonitrile Butadiene Styrene)with UV Protector
Diameter 113mm
Length 500mm and other length
Connector 3/4NPT
Flow range(m³/h) 6-28
Bubble size(mm) 1-2
Service area:(m²) 1.5-2.5

1、Municipal wastewater treatment.
2、Industrial wastewater treatment.
3、Clean water treatment.
4、Sludge stabilization.
5、Wastewater ozone diffusion.
6、Aeration of fish ponds.
7、Aeration of streams and lakes.

Product Reviews
You must Login/Register to can submit your review

All Rights Reserved to AquaEnergy Expo © 2025