Motorized Ball Valve

Motorized Ball Valve - F.1200

(0 reviews)

Get Price

(34) Views

(0) Contacts

Contact Company

Bkvvana

Konya, Turkey

(375) Views

(1) Contacts

Before carrying out maintenance or dismantling the valve: ensure that the pipes, valves and fluids have cooled down, that the pressure has decreased and that the lines and pipes have been drained in case of toxic, corrosive, inflammable and caustic liquids. Temperatures above 50°C and below 0°C might cause damage to people.
INSTALLATION

Do not lift the valve by the actuator.
Handle with care

Before installing, check that:
• the piping is clean,
• the valve is clean and undamaged.
• the thread are clean and undamaged.
• Ensure that the electrical data of the valve’s actuator corresponds to the electrical data of the supply.
Do not use with fluids that are petroleum-based or contain mineral oil, hydrocarbons, or solvents.
Do not use with abrasive fluids.
Suitable for antifreeze solutions (with minimum 50% water dilution diethylene glycol, ethylene glycol, and
propylene glycol).
Use piping of the same nominal size as the valve.
The valve must be installed with the flow direction corresponding to the arrow on the valve body.

                                                            Enclosure
                                                            IP54
                                                        
                                                            Power
                                                            Single phase 24V AC (Option: 230V AC)
                                                        
                                                            Working range
                                                            -10 ~ +50°C
                                                        
                                                            Torque
                                                            DN15~DN25: 2 Nm ; DN32~DN50: 10 Nm
                                                        
                                                            Running time
                                                            DN15~DN25: 40-50 sec ; DN32~DN50: 95-105 sec
                                                        
                                                            Power
                                                            2W
                                                        
                                                            Signal (Proportional)
                                                            0(2)-10V / 0(4)-20mA
                                                        
                                                            Function
                                                            On/Off, Floating (Option: proportional)
                                                        
                                                            Movement
                                                            Rotate 90°